65
Synchronized Recording (SLV-SE800D1/D2/E and SX800D only)
Additional Operations
Synchronized Recording
(SLV-SE800D1/D2/E and SX800D only)
You can set the VCR to automatically record programmes from equipment such as a
satellite tuner by connecting the equipment to the DECODER/LINE-3 IN connector.
The connected equipment must have a timer function for this feature to work.
When the connected equipment turns on, the VCR also automatically turns on and
starts recording a programme from DECODER/LINE-3 IN.
How to connect for Synchronized Recording
Connect the DECODER/LINE-3 IN connector of the VCR to the TV Scart connector
of the satellite tuner. Then connect the LINE-1 (TV) connector to the TV.
Scart cable (not supplied)
DECODER/t LINE-3 IN
i LINE-1 (TV)
TV Scart
connector
Satellite tuner, etc.
Scart cable (not supplied)
Scart (EURO-AV)
: Signal flow
continued
To Next Page
Loading...
