84
Audio dubbing (SLV-SE800D1/D2/E and SX800D only)
To stop editing
Press x STOP on this VCR and the stereo system (or other VCR).
To listen to both the hi-fi and normal audio
Set AUDIO MIX to ON in the OPTIONS-1 menu (page 78). Use this feature to listen
to dubbed audio over the original hi-fi audio. When AUDIO MIX is set to ON, the
AUDIO MONITOR button does not function.
Remember to reset AUDIO MIX to OFF after playing the tape.
Note
• If you eject the tape or turn the VCR off, AUDIO MIX is automatically set to OFF.
4
To start editing, press the X (pause) buttons on this VCR and the stereo system
(or other VCR) at the same time.
After you use this feature, the audio in playback mode is automatically set to
monaural.
To Next Page
