Editing58
7 To start editing, press the P PAUSE buttons on this VCR and the stereo
system (or other VCR) at the same time.
When the counter reaches “0H00M00S,” audio dubbing stops
automatically.
To stop while editing
Press the p STOP buttons on this VCR and the stereo system (or other VCR).
To listen to both the hi-fi and nor mal audio
Set VHS AUDIO MIX to ON in the SET UP MENU (page 52). Use this
feature to listen to dubbed audio over the original hi-fi audio. When VHS
AUDIO MIX is set to ON, the AUDIO MONITOR button does not function.
Remember to reset VHS AUDIO MIX to OFF after playing the tape.
Audio dubbing (VHS deck only) (continued)
To Next Page
Loading...
