Sony SLV-T2000 - Specifications

66
Additional Information
Specifications
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
37 W
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions
Approx. 430 × 109 × 387 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 7.2 kg
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Audio /video cable (1)
S-video cable (1)
Mains lead (2)
21-pin adaptor (1)
Design and specifications are subject to change
without notice.
System
Channel coverage
SLV-T2000MN:
VHF R1 to R12, E2 to E12, NZ1 to NZ9
UHF E21 to E69, R21 to R69
CATV S01 to S05, S1 to S41
SLV-T2000AS:
VHF AS0 to AS12, AS5A, AS9A
UHF AS28 to AS69
CATV S01 to S05, S1 to S41
RF output signal
UHF channels 28 to 69
Aerial out
75-ohm asymmetrical aerial socket
Inputs and outputs
: LINE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
DECODER
21-pin
Video input: pin 20
Audio input: pins 2 and 6
LINE-2 IN
S VIDEO, 4-pin mini DIN
Y: 1 Vp-p, 75 ohms, unbalanced, sync negative
C: 0.3 Vp-p, colour burst, 75 ohms, unbalanced
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE OUT
S VIDEO, 4-pin mini DIN
Y: 1 Vp-p, 75 ohms, unbalanced, sync negative
C: 0.3 Vp-p, colour burst, 75 ohms, unbalanced
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO OUT, phono jack (2)
Standard output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms