EasyManua.ls Logo

Sony SLV-T2000 - Page 64

Sony SLV-T2000
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
63
Additional Information
Recording Playback
Symptom
The picture has no sound.
The sound is unstable or has an
echo.
No TV programme appears
on the TV scr een.
TV reception is poor .
The tape starts playing as soon
as it is inserted.
The tape is ejected when you
press r REC.
Nothing happens when you
press r REC.
The timer does not operate.
Timer recording cannot be
made by one deck.
Remedy
The tape is defective. Use a new tape.
When you play a tape with the same sound r ecor ded
on both the hi-fi and nor mal sound tracks, make sur e
the VHS AUDIO MIX option in the SET UP MENU is
set to OFF.
Make sur e the TV is set to the video channel. If you
are using a monitor , set it to video input.
If the VCR is connected to the TV using only the aerial
cable, make sur e that the RF MODULATOR option in
the SET UP MENU is set to ON.
Adjust the TV aerial.
If the VCR is connected to the TV using only the aerial
cable, set the RF MODULA TOR option in the SET UP
MENU is set to ON.
The safety tab of the VHS tape has been r emoved. T o
record on this tape, cover the tab hole.
Check that the safety tab of the VHS has not been
removed, or that the safety switch of the 8 mm tape
has not been slid to show the r ed por tion.
Make sur e the tape is not at its end.
Select the cor rect sour ce with the INPUT SELECT
button. Select a pr ogramme position when r ecor ding
TV programmes; select “L1” or “L2” when r ecording
from other equipment.
Check that the clock is set.
Make sur e a tape has been inser ted.
Check that the safety tab of the VHS has not been
removed, or that the safety switch of the 8 mm tape
has not been slid to show the r ed por tion.
Make sur e the tape is not at its end.
Make sur e a pr ogramme has been set for timer
recording.
Make sur e your timer settings have not alr eady passed
the cur rent time.
Check that the decoder is turned on.
Check that the satellite tuner is turned on.
The clock stops if the VCR is disconnected fr om the
mains for mor e than one hour . Reset the clock and
timer.
Make sur e to use the deck which you have selected
TIMER REC option in the SET UP MENU.
continued
Timer recording

Related product manuals