Sony STR-DA3200ES - OSD Adjustment Procedure

28
STR-DA3200ES/DG1000
OSD ADJUSTMENT
Connection
1. Connect a frequency counter to the TP6501 pin 2 on the VIDEO
board.
2. Press the [POWER] button to turn on the main power.
3. Perform the MEMORY CREARING MODE.
4. Press the [MENU] button on the remote commander to display
“Lebel Setting”.
5. Press the V v button on the remote commander to display
“Video Settings” and press the button on the remote
commander.
6. Press the V v button on the remote commander to display
“COLOR SYSTEM” and press the button on the remote
commander.
7. Press the V v button on the remote commander to select
NTSC.
8. Adjust the CT6501 (DA3200ES; US, Canadian, Taiwan/
DG1000) or CT6502 (DA3200ES; AEP, UK) so that the
frequency counter reading is 3.579545 MHz.
9. Press the V v button on the remote commander to select
PAL.
10. Adjust the CT6503 so that the frequency counter reading is
4.433618 MHz.
Note: The Steps 9 and 10 should be performed to AEP and UK models of
DA3200ES.
VIDEO board
TP6501 pin
2
+
–
frequency counte
r
CT6502
TP6501
1
4
– VIDEO Board (Component Side) –
CT6501
CT6503
Adjustment and Connection Location: