Sony STR-DA7100ES - Page 79

79
GB
Amplifier Operation
5 Press PRESET TUNING + or
PRESET TUNING – to select a
preset number.
If you want to switch the memory page,
press SHIFT on the remote.
If “MEMORY” goes out before you select
the preset number, start again from step 4.
6 Press MEMORY/ENTER again.
The station is stored as the selected preset
number.
If “MEMORY” goes out before you press
MEMORY/ENTER, start again from step
4.
7 Repeat steps 2 to 6 to preset
another station.
1 Turn INPUT SELECTOR to
select tuner.
2 Press PRESET TUNING +/–
repeatedly to select the preset
station you want.
Each time you press the button, you can
select a preset station as follows:
Using the remote
1 Press INPUT SELECTOR, then move the
easy scroll key to select “TUNER” from the
input list.
2 Move the easy scroll key to select the preset
number you want, then press the key to enter
the selection.
1 Press INPUT SELECTOR, then
select “TUNER” from the input
list.
You can also use INPUT SELECTOR on
the receiver.
Tuning to preset stations
1
2
Naming preset stations
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
1
2
4
5,6
3
continued