The numeric codes
corresponding to the
component and the maker of
the component
Use the numeric codes in the tables below to
control non-Sony conponents and also Sony
components that the remote is normally unable
to control. Since the remote signal that a
component accepts differs depending on the
model and year of the component, more than
one numeric code may be assigned to a
component. If you fail to program your remote
using one of the codes, try using other codes.
Notes
l
The numeric codes are based on the latest
information available for each brand. There is a
chance, however, that your component will not
respond to some or all of the codes.
- All of the functions on this remote may not be
available when used with your particular
component.
To control a CD player
Maker Code(s)
SONY
101,102,103
DENON 104, 123
JVC 105, 106, 107
KENWOOD
108, 109, 110
MAGNAVOX 111, 116
MARANTZ 116
ONKYO 112,113,114
PANASONIC 115
PHILIPS 116
PIONEER 117
TECHNICS 115, 118, 119
YAMAHA 120,121,122
To control a DAT deck
Maker Code(s)
SONY 203
PIONEER 219
To control an MD deck
Maker
Code(s)
SONY 301
DENON
302
JVC
303
KENWOOD 304
To control a tape deck
Maker
Code(s)
SONY 201,202
DENON 204,205
KENWOOD
206.207.208.209
NAKAMICHI 210
PANASONIC 216
PHILIPS 211,212
PIONEER 213.214
TECHNICS 215,216
YAMAHA 217,218
To control an LD player
Maker
CodeW
. ,
SONY 601.602.603
PIONEER
606
To control a video CD player
Maker
Code(s)
SONY 605
continued
11
To Next Page
Loading...
Need help?
General
