Front Panel Parts Description
q
DIMMER button
Press repeatedly to adjust the brightness of the display
When you want to turn off the display, set in the
“DIMM RANGE” parameter in the SET UP menu
(page
54)
q
DISPLAY button
Press repeatedly to change the information on the
display wiqdow as follows:
Index name of the component
+
Selected component
+
Sound field applied to the program source
When the tuner is selected
t, Index name oft e preset station*
or program station name**
+
Frequency
+
Program type indication’*
+
Radio text**
+
Current time**
+
Sound field applied to the band
or the preset station
Index name appears only when you have assigned one to the
component or preset station (see page 51) Index name does not
appear when only blank spaces have been entered, or it is the
same as thefunction button
** These indications appear only during RDS reception (Models of
area code CED only See page 47)
*
q
The following buttons operate the built-in tuner For
details, see “Receiving Broadcasts” starting from page
43
FM/AM button
Selects the FM or AM band
SHIFT button
Selects a memory page for preset stations
PRESET TUNING +/- buttons
Scans all preset stations
q
CINEMA STUDIO EX A-C buttons
Press to select CINEMA STUDIO EX A-C sound field
For details, see “CINEMA STUDIO EX A-C” on page
33
q
MULTI CHANNEL DECODING indicator
This indicator lights when the unit is decoding signals
recorded in a multi channel format
28
To Next Page
Loading...
Need help?
General
