Sony STR-DB840 User Manual

q AV I/& switch
Press to turn on or off the components that the remote
is programmed to operate For details on
programming procedure, see “Programming the
Remote” on page 16
If you press the I/C!) switch (a) at the same time, it
will turn off the main component and other Sony
audio/video components (SYSTEM STANDBY)
Note
The function of the AV I/& switch changes automatically
each time you press the FUNCTION button (m) Depending
on the component, the above operation may not be be
possible or may operate differently than described
q Display window
The current status of the selected component or a list
of selectable items appears here
Note
Characters other than letters of the alphabet or numbers may
be displayed incorrectly on the remote, even if they appear
correctly in the display window on the main unit
q l/6 switch
Press to turn the receiver on or off
Note
Before you turn on the receiver, make sure that you have
turned the MASTER VOLUME control on the receiver to the
leftmost position to avoid damaging your speakers
q SLEEP button
Press repeatedly to activate the sleep function and
select the duration after which the receiver turns off
automatically
q MASTER VOL +I- buttons
Press to adjust the volume level of all speakers at the
same time
q MUTING button
Press to mute the sound The MUTING indicator on
the receiver lights up when the sound is muted
q FUNCTION button
Press to display the function (component) list Press
again to revert back to the component information
See the table on page 9 for information on the buttons
you can use to control each component
If you want to change the contents of the function list
to match your particular components, do the
procedure “Programming the Remote” on page 16
q SET UP button
Press to display the set up list Press again to revert
back to the component information
q Easy scroll key
While displaying a list, move up or down to select an
item from the list, and then press to enter the selection
q SOUND FIELD button
Press to display the sound field list Press again to
revert back to the component information
5

Sony STR-DB840 Specifications

General

Digital inputs	2 Optical, 1 Coaxial
Power output	100 watts per channel into 8Ω (stereo)
Frequency response	10Hz to 100kHz
Total harmonic distortion	0.09%
Input sensitivity	2.5mV (MM), 200mV (line)
Speaker load impedance	8 ohms
Dimensions	430 x 157mm
Tuning range	FM, MW
Video Connections	composite