You can tune in stations on this receiver in the following
WayS:
Automatic FM Memory (AUTOBETICAL)
-Models of area code CED only
You can have the receiver automatically store up to 30 of
the clearest FM and FM RDS stations in alphabetical order
(see page 44)
Direct Tuning
You can enter a frequency of the station you want directly
by using the numeric buttons on the supplied remote (see
page 45)
Automatic Tuning
If you don’t know the frequency of the station you want,
you can let the receiver scan all available stations in your
area (see page 45)
Preset Tuning
After you have tuned in stations using Direct Tuning or
Automatic Tuning, you can preset them to the receiver
(see page 46) Then you can tune in any of the stations
directly by entering its Z-character code using the
L
supplied remote (see page 46) Up to 30 FM or AM
stations can be preset The receiver will also scan all the
stations that you have preset (see page 46)
RDS functions
-Models of area code CED only
This receiver also allows you to use RDS (Radio Data
System), which enables radio stations to send additional
information along with the regular program signal You
can use the following three convenient RDS features:
- Displaying RDS information (see page 47)
- Scanning preset stations by program type (see page
- Using the EON function (see page 48)
Note that RDS is operable only for FM stations ’
* Not all FM statiom provide RDS service, JOY do they provide the
SR~IE types ofservices Zfyou are notfamilim with the RDS services
in yotrt men, check with your local radio stationsfot details
Before you begin, make sure you have:
l
Connected FM and AM antennas to the receiver (see
page 5)
43
To Next Page
Loading...
Need help?
General
