Name Function
[]4--
Press to select the channel
entry mode, either one or two
digits of the VCR or satellite
t/lIler.
To select the channel entry
mode of the TV, press TV
/[_) and then press -/--.
>10 Press to select track numbers
over 10 of the VCR. VCD
player, LD player, CD player,
MD deck. tape deck. TV or
satellite tuner.
CLEAR Press to clear a mistake when
you press tile incorrect
numeric button of tile DVD
player, satellite tuner. Blu-ray
disc recorder. PSX. DVD/
VHS COMBO or DVD/HDD
COMBO.
[] SLEEP Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
[] CATEGORY Press to select tile
category
MODE mode for XM radio.
[] 2CH Press to select 2CH STEREO
mode.
[] A.F.D. Press to select A.F.D. mode.
[] TV Press Io light up tile button. It
changes the remote key
function to activate the
buttons with orange printing.
It also activate the OPTIONS
TOOLS ([_}), MENU ([_),
RETURN/EXIT _/[_),
DISPLAY/[_), @ (_) and
4,/I!,/4,/,*,([_) buttons to
perform menu operations for
Sony TVs only.
[] RM SET UP Press to set-up the remote.
a/The munber 5, PRESET +, TV CH +, and [:::>-
buttons have tactile dots. Use the tactile dots as
references when operating tile receiver.
b)This button is also available for Sony DIGITAL
MEDIA PORT adapter operation. For details on
the function of tile button, see tile operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
Notes
• Tile AUX on tile remote is not available for
receiver operation.
• Some fuoctions explained ill this section may not
work depending on the modeh
• The ahove explanation is intended to serve as all
example only. Therefore. depending on the
component, the above operation may not be
possible or may operate differently than described.
14us
To Next Page
Loading...
