2
Press DMPORT.
You can also use the INPUT SELECTOR
on the receiver to select "DMPORT".
Start playback of the connected
component.
Tile sound is phtyedback on the receiver.
Fordetails, see theoperating instructions
suppliedwith the DIGITALMEDIA
PORT adapter.
You need to assign composite video input to
DMPORT input so that you can view the
images on the TV screen.
1 Press RECEIVER.
Tile RECEIVER indicator lights up and
receiver operation is activated.
2
3
4
5
6
Press MENU.
"I-LEVEL" appearson the display.
Press 4,1,!,repeatedly to select
"6-VIDEO".
Press (_ or * to enter the
menu.
Press 4,1,!,repeatedly to select
"DMPORT V.".
Press _) or * to enter the
parameter.
7
Press 4,1,!,repeatedly to select
the composite video input you
want to assign to DMPORT
input.
Initial setting: NONE
The assignable composite video input are
VIDEO 1, VIDEO 3, DVD and SAT
inputs.
For example, select "-VIDEO 1".
When you press DMPORT, the inmges
from the component connected to the
VIDEO 1 VIDEO IN jack through
DIGITAL MEDIA PORT adapter will
appear on the TV screen.
To return to the previous
display
Press _,.
Notes
• Depending un the type of DIGITAL MEDIA
PORT adapter, you can operate the comlected
compuuent by using the rmnote. For details un
remote buttou operation, see page 10.
• Be sure you have made the video couuectiuu l'rom
DIGITAL MEDIA PORT adapter to the receiver
(page 73).
• Be sure you have connected the MONITOR
VIDEO OUT jack of the receiver tu the TV (page
73).
• Depending un the DIGITAL MEDIA PORT
adapter, video output may not be possible.
Tip
When listening to MP3 or other compressed music
using a portable audio source, yuu can enhance the
sound. Press MUSIC repeatedly to select
"PORTABLE" (page 54).
74us
To Next Page
Loading...
