Sony STR-DG900 - Page 11

11
US
C:\Documents and
Settings\pc13\Desktop\JC060000_2667347112DG900_US\2667347112\US03CON_STR-DG900-
U.fm
masterpage: Right
STR-DG900
2-667-347-11 (2)
Getting Started
Name Function
A AV ?/1 Press to turn on or off the
Sony audio/video components
that the remote is
programmed to operate.
To turn the TV on or off, press
TV (wk) and then press AV
?/1.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (C).
B ?/1 Press to turn the receiver on or
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
Name Function
C Input buttons Press one of the buttons to
select the component you
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components as follows.
You can program the remote
to control non-Sony
components by changing the
code. For details see
“Programming the remote”
(page 86).
D ZONE 2 Press to light up the button. It
change the command mode to
Zone 2.
E SOURCE Press ZONE 2 (D), and then
press SOURCE to select the
current input of the main
receiver for Zone 2.
F MOVIE,
MUSIC
Press to select sound fields
(MOVIE, MUSIC).
G ON SCREEN Press to display the menus of
the receiver on the TV screen.
H D.TUNING Press to enter direct tuning
mode.
Button Assigned Sony
component
VIDEO 1 VCR (VTR mode 3)
VIDEO 2 VCR (VTR mode 2)
VIDEO 3 VCR (VTR mode 1)
DVD DVD player
TV/SAT TV tuner
MD/TAPE MD deck
SA-CD/CD Super Audio CD/
CD player
TUNER Built-in tuner
PHONO Not assigned.
continued
US01COV_STR-DG900-U.book Page 11 Wednesday, April 26, 2006 12:15 PM