40
US
C:\Documents and
Settings\pc13\Desktop\JC060000_2667347112DG900_US\2667347112\US03CON_STR-DG900-
U.fm
masterpage: Left
STR-DG900
2-667-347-11 (2)
The selected input appears on the display.
*When headphone is connected, “HP MULTI”
appears on the display.
Note
The surround effect does not work when
MULTI CH IN is selected.
2 Turn on the component and
start playback.
3 Press MASTER VOL +/– to
adjust the volume.
You can also use MASTER VOLUME on
the receiver.
To mute the sound
Press MUTING.
The muting function will be canceled when
you do the following.
• Press MUTING again.
• Increase the volume.
• Turn off the receiver.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
Selected input
[Display]
Components that can
be played back
VIDEO 1 or
VIDEO 2
[VIDEO 1 or
VIDEO 2]
VCR, etc., connected to
the VIDEO 1 or VIDEO 2
jack
VIDEO 3
[VIDEO 3]
Camcorder, video game,
etc., connected to the
VIDEO 3 IN/
PORTABLE AV IN jack
DVD
[DVD]
DVD player, etc.,
connected to DVD jack
TV/SAT
[TV/SAT]
Satellite tuner, etc.,
connected to the TV/SAT
jack
MD/TAPE
[MD/TAPE]
MD deck, tape deck, etc.,
connected to the MD/
TAP E jack
SA-CD/CD
[SA-CD/CD]
Super Audio CD/CD
player, etc., connected to
the SA-CD/CD jack
TUNER
[FM or AM band]
Built-in radio tuner
TUNER
[XM RADIO]
For details, see page 71
PHONO
[PHONO]
Turntable, etc., connected
to the PHONO jack
HDMI 1 or
HDMI 2
[HDMI 1 or
HDMI 2]
HDMI components
connected to HDMI jack
MULTI CH IN
[MULTI
DIRECT*]
Component connected to
the MULTI CH IN jack
US01COV_STR-DG900-U.book Page 40 Wednesday, April 26, 2006 12:15 PM