Sony STR-DG900 - Naming Inputs

81
US
C:\Documents and
Settings\pc13\Desktop\JC060000_2667347112DG900_US\2667347112\US05OTH_STR-DG900-
U.fm
masterpage: Right
STR-DG900
2-667-347-11 (2)
Other Operations
Assignable inputs for HDMI
input
Note
You cannot reassign more than one HDMI input to
the same input.
Naming inputs
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
1 Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2 Press AMP and then press
MENU.
“1-LEVEL SET” appears on the display.
3 Press control button V/v
repeatedly to select either
“5-AUDIO SET” or “6-VIDEO
SET”.
4 Press the control button or
control button b to enter the
menu.
5 Press control button V/v to
select “NAME IN”.
6 Press the control button or
control button b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
“To create an index name” (page 70).
To return to the previous display
Press control button B.
HDMI input Assignable
inputs
Display
HDMI 1 NONE HDMI 1– NONE
VIDEO 1 HDMI 1– VIDEO 1
VIDEO 2 HDMI 1– VIDEO 2
VIDEO 3 HDMI 1– VIDEO 3
DVD HDMI 1– DVD
TV /SAT HDM I 1 – TV / SAT
MD/TAPE HDMI 1– MD/TAPE
SA-CD/CD HDMI 1– SA-CD
HDMI 2 NONE HDMI 2– NONE
VIDEO 1 HDMI 2– VIDEO 1
VIDEO 2 HDMI 2– VIDEO 2
VIDEO 3 HDMI 2– VIDEO 3
DVD HDMI 2– DVD
TV /SAT HDM I 2 – TV / SAT
MD/TAPE HDMI 2– MD/TAPE
SA-CD/CD HDMI 2– SA-CD
US01COV_STR-DG900-U.book Page 81 Wednesday, April 26, 2006 12:15 PM