14. PURE DIRECT
The indicator above the button lights up when the Pure Direct function is activated.
[7] Parts and Controls Receiver (STR-DN860)
Front panel (STR-DN860) (lower section)
1. PHONES jack
Connect headphones here.
2. AUTO CAL MIC jack
3. (USB) port
4. INPUT SELECTOR
5. MASTER VOLUME
[8] Parts and Controls Receiver (STR-DN860)
On/standby indicator (STR-DN860)
Green: The receiver is turned on.
Amber: The receiver is in standby mode, and:
[Control for HDMI], [Remote Start], [Bluetooth Standby] (*) or [Quick Start/Network Standby] (**) is
set to [On].
[Standby Through] is set to [On] or [Auto].
The indicator turns off when the receiver is in standby mode, [Control for HDMI], [Standby
Through], [Remote Start], [Bluetooth Standby] (*) and [Quick Start/Network Standby] (**)
are set to [Off].
To Next Page
Loading...
