Sony Trinitron KV-13VM20 - Page 37

2
| Timer Recording
SOOO]
RM-Y126
=>
You can preset up to six recordings up to one month in advance. The recordings
can be preset with the Commander while referring to the TIMER SET/CHECK
display on the screen.
Before you begin, check the following points. ;
* The date and clock must be set correctly. (See “Setting the Clock - CURRENT
TIME SET” on pp. 25-26.)
+ Make sure that the cassette tape is long enough-to record all the programs.
+ Make sure that the safety tab on the cassette is not broken off.
Recording from today to one month later
If today is August 31st, you can set the timer to record a program broadcast
between today and September 30 (for 31 days). If today is January 31st, you can
set the timer to record a program broadcast between today and February 28th
(for 29days). A leap year is automatically considered.
Setting the Timer
Example: Suppose you want to record a program broadcast on channel 26 from
9:00 PM on Thursday March 10 in EP mode. Note that 12:00 AM is midnight and
- 12:00 PM is noon.
Press TIMER ON SCREEN.
The TIMER SET/CHECK menu appears.
TIMER SET/CHECK
DATE START
TIMER ON SCREEN bysles
a
ofa
ajas
sfai,
Use ¢ GET Exit fei]
Press RETURN.
Make sure that today's date is flashing. -
If not, reset the correct time. See “Setting the Ciock - CURRENT
TIME SET” on pp. 25-26. TIMER SET/CHECK 3/1 TUE
RETURN ae
afce
ofes
ofan
ee
afae
Use ¢ GET Ext GED
During timer recording, / STAND BY indicator flashes.
Chapter 5 : Using Advanced VCR Features 37
Rinninnau rani