Sony Trinitron KV-13VM20 - Page 39

Press RETURN to flash the recording speed
position then A+ or V- until EP appears.
(R) TIMER SET/CHECK 3/1 TUE
di DATE START STOP CH
LN Monw 900n = 10:Shew Be
afe-
a
Use ¢ ER Exit Gay
RETURN
The AT (AUTO SPEED) mode starts recording at the SP speed, but if it determines there isn't
enough tape left to complete the programmed recording, it switches to the EP speed.
TIMER SET/CHECK 3/1 TUE
DATE START STOP
D> 3N0nw 9:00em
sfee | (ahee
9 Press RETURN to store the setting.
10:55em ae
RETURN
Use $ ET) Exit fea)
| \ After you finish programming, press POWER to turn off the VIDEO TV.
The TIMER REC indicator lights.
To change or correct the setting before completing it
Press BACK SPACE to return to the item to be changed.
To preset another program
Move the cursor to the second line after step 9 and repeat steps 2 to 10.
Daily/Weekly Recording
You can preset the timer-activated recording to the same program everyday of the
week (Daily recording), or one day of the week(Weekly recording).
Follow steps 1 through 2 in “Setting the Timer” on page 37.
You can select the foltowing programs.
Each time you press V’-, the indication under “DATE” on screen changes in the
following order.
EVERY SUN SUN - SAT (Everyday of the week)
EVERY MON
:
MON - SAT (Everyday except Sunday)
MON - FRI (Everyday except
ea Saturday and Sunday)
EVERY SAT
=>
The following messages under each case
appear on the screen:
+ “PLEASE PUT IN A RECORDABLE
CASSETTE” --- :
PLEASE PUT IN A RECORDABLE
CASSETTE
When switched to stand-by mode for timer
recording, if a cassette is not inserted or a
cassette without safety tab is inserted.
+ “PLEASE PUSH POWER OFF TO SET
TIMER’ ---
When the VIDEO TV is still turned on
before the timer recording starts or when
SLEEP OFF time and TIMER REC
START overlap.
* “PLEASE STOP THE TAPE” ---
When TIMER ON SCREEN is pressed at
the same time the tape is being played
back.
* “VCR IS RECORDING’ ---
When PLAY, FAST FORWARD, REWIND
/REVIEW, EJECT, CH +/-, 0~9 buttons,
INPUT SELECT, JUMP or MENU is
pressed at the same time the timer
recording is being done.
* “TIMER REC STARTS IN 5 MINUTES’ ---
5 minutes before timer recording starts.
* “PLEASE SET THE CLOCK FIRST" ---
When TIMER ON SCREEN is pressed in
the condition the current time is not set.
Chapter 5 : Using Advanced VCR Features 39
Buipiooay Jew)