button
or a programme number
button on the
remote control.
• Check the aerial connection.
• Check that the selected video source is
on.
• Turn the TV off for 3 or 4 seconds and
then turn it on again using the
button
on the front of the TV.
Poor or no picture (screen is dark), • Using the MENU system, select the
but good sound. Picture Adjustment display.
Adjust the brightness, picture and
colour balance levels.
• From the Picture Adjustment display
select
to return to the factory
settings.
Poor picture quality when watching • Press the button repeatedly on the
a RGB video source. remote control until the RGB symbol
is displayed on the screen.
Good picture, no sound • Press the +/– button on the remote
control.
• If
is displayed on the screen, press
the
button on the remote control.
No colour on colour programmes • Using the MENU system, select the
Picture Adjustment display.
Adjust the colour balance.
• From the Picture Adjustment display
select
to return to the factory
settings.
Distorted picture when changing • Turn off any equipment connected to
programmes or selecting teletext the 21 pin Euro connector on the rear of
the TV.
Remote control does not function • Replace the batteries.
• If you continue to have these problems, have your TV serviced by qualified
personnel.
•NEVER open the casing yourself.
19
Specifications
TV system
I
Colour system
PAL
NTSC 3.58, 4.43 (only Video In)
Channel coverage
UHF: B21-B69
Picture tube
Super Trinitron
Approx. 63 cm (25 inches) (Approx. 59 cm picture measured diagonally),
110 deflection
Inputs
• Rear Terminals
1
/ 21-pin Euro connector (CENELEC standard) including audio/video
input, RGB input, TV audio/video output
• Front Terminals
2
video input - phono jack
2
audio input - phono jack
Outputs
Headphones jack - minijack stereo
Sound output:
5 W (RMS)
Power consumption
92 W
Standby Power consumption
0.95 W
Dimensions (wxhxd)
Approx. 604 x 549 x 508 mm
Weight
Approx. 31 kg
Accessories supplied
RM-883 Remote Control (1)
IEC designated batteries (2)
Other features
TELETEXT, Fastext
Design and specifications are subject to change without notice.