Connecting and Installing the 71/(continued)
Disconnect all power sources before making any connections.
Additional Connections
The following connections are for accessories
that will enhance your viewing options.
Connecting a DVD Player
1 Using A/V connectors, connect LINE OUT
on your DVD to VIDEO IN on your TV
(Red-AUDIO Right, White-AUDIO Left,
Yellow-VIDEO).
Note
• For the best picture quality, connect the
DVD player directly to the TV.
For optimum picture quality, use S VIDEO
I instead of the yellow AN cable. S Video
does not provide sound, your audio
connectors must still be connected,
(Rear of DVD player)
1 _ AV outputs
__ (Rear of TV)
_ AUDIO-R (red)
_-- AUDIO-L (white)
VIDEO (yellow)
VMC-810S/8ZOS (not supplied)
Connecting an audio system
For enhanced sound, connect your audio
system to your TV.
1 Using AUDIO connectors, connect AUDIO
OUT on your TV to one of the unused line
inputs (e.g. TV, AUX, TAPE 2) on your
stereo (White-AUDIO Left, Red-AUDIO
Right).
2 Set your stereo to the chosen line input
(e.g. TV, AUX, TAPE 2). Refer to page 20
of this manual for additional audio setup
instructions.
(Rear of TV)
2
RK-74A
(not supplied)
I-ine
10
To Next Page
