Troubleshooting (continued) ; Specifications
Only snow and noise
appear on the screen
Cannot receive upper
channels (UHF) when
using an antenna
Cannot receive any
channels when using
cable
Cannot gain enough
volume when using a
cable box
• CABLE setting may not be set
correctly in the SET UP menu.
• Antenna/cable connections may
not be correct.
TV may be set to AUX mode.
CABLE setting may not be correct
in the SET UP menu.
CABLE setting may not be set
correctly in the SET UP menu.
I• Volume may not be adjusted on
your cable box.
Ensure that you have selected the
correct CABLE mode in the
SET UP menu. (see page 23)
Press ANT on your remote
control to change the input mode.
(see page 15)
• Ensure that CABLE is set to OFF
in the SET UP menu. (see page 23)
• Use AUTO PROGRAM to add
receivable channels tEat are not
presently in TV memory. (see
page 24)
• Ensure that CABLE is set to ON
in the SET UP menu. (see page 23)
• Use AUTO PROGRAM to add
receivable channels that are not
presently in TV memory. (see
page 24)
I° Press TV (FUNCTION) and
adjust the TV's volume.
TV is fixed to one • CHANNEL FIX settings may not • Check your CHANNEL FIX
channel be correct, settings. (see page 23)
If, after reading these operating instructions, you have additional questions related to the use of your Sony
television, please call our Direct Response Center at 1-800-222-SONY (7669).
Supplied accessories
Remote control RM-Y135A (1)
(KV-20V80 only)
Remote control RM-Y165 (1)
(KV-27S40, 27V40 only)
Remote control RM-Y167 (1)
(KV-27S45, 27S65, 27V45, 27V65 only)
Batteries size AA (R6) (2)
Optional accessories
Connecting cables
VMC-810S/820S, VMC-720M,
YC-15V/30V, RK-74A
TV Stand SU-27A3
(All models except KV-20V80)
UN mixer EAC-66
30
To Next Page
