Operating video equipment
Magnavox
Programming the remote Mitsubishi/MGA
NEC
You can use the supplied remote control to Panasonic
operate Sony or non-Sony video equipment. Philips
Pioneer
1 Press CODE SET. Quasar
2 Press VTR/DVD (FUNCTION). RCA/PROSCAN
3 Use the 0-9 buttons to key in the
manufacturer's code number from the
following chart•
4 Press ENTER.
VCR manufacturer code numbers
Manufacturer Code
Sony 301,302, 303
Aiwa 338, 344
Broksonic 319, 317
Canon 309,308
Daewoo 341,312, 309
Emerson 319, 320, 316, 317, 318,341
Fisher 330,335
Funa[ 338
General Electdc 329, 304, 309
Go Video 322
Goldstar 332
Hitachi 306, 304, 305,338
JVC 314,336, 337, 345, 346, 347
Kenwood 314, 336, 332, 337
LXl (Sears) 332,305, 330,335, 338
26
Realistic
Sansui
Samsung
Sanyo
Sharp
Sylvania
Symphonic
Technics
Toshiba
Wards
Zenith
308, 309, 310 To stop Press m.
323,324,325, 326
314,336, 337 To fast forward Press Ib!_.
308, 309, 306, 307 To rewind the tape Press _14.
308, 309, 310 To pause Presstl.
308 To resume normal playback,
308, 309, 306 press again or press I_. -
304, 305, 308, 309, 311,
312, 313,310, 329 To search the Press _ or _ during
309, 330, 328, 335, 324, 338 picture forward or playback.
314 backward To resume normal playback,
322, 313, 321 release the button.
330, 335 l'o change input Press TVNTR.
327, 328 mode
308, 309, 338, 316
338
309, 308 Tips "_"
312,311 • Insomerarecases yoummlnotbeabletooperate
327, 328,335,331,332 your non-Sony video equipment with the supplied
331 remote control. In this case, ph'ase use the
equipment's own remote eonh'oL
• ThecodenumbersforSonl/VCR'sareassignedatthe
Operating a VCR Buttons on the
remote control
To turn on or off Press VTR (POWER).
To select a channel Press the 0 - 9 buttons.
directly
To change Press CH +/-.
channels
To record Press _ and •
simultaneously.
To play Press lb.-.
factory as follozos:
VHS VCR
301 (preset code
for the supplied
remote control)
8 mm VCR 302
Beta, ED Beta VCRs 303
• When you remove the batteries, the code number may
revert to the factory setting.
To Next Page
