What to do if my Sony TRINITRON KV-27V40 has good picture but no sound?
If your Sony TV has a good picture but no sound, the sound may be set to MUTE. Check the MTS setting in the AUDIO menu. Also, your TV may be set to SAP, so check your SPEAKER settings.
Why can't my Sony TRINITRON KV-27V40 receive any channels when using cable?
If your Sony TV cannot receive any channels when using cable, the CABLE setting may not be set correctly in the SET UP menu. Ensure that CABLE is set to ON in the SET UP menu.
Why can't my Sony TRINITRON KV-27V40 receive upper channels (UHF) when using an antenna?
If your Sony TV cannot receive upper channels (UHF) when using an antenna, the CABLE setting may not be correct in the SET UP menu. Ensure that CABLE is set to OFF in the SET UP menu.
What to do if my Sony TRINITRON KV-27V40 TV screen is not lit and there is no sound?
If your Sony TV screen is not lit and there is no sound, the power cord may not be plugged in. Press TV/VIDEO until you receive a channel. Also, the batteries may not have been placed with the correct polarity. Perform AUTO SET UP again by pressing the SET UP button on your TV.
Why does my Sony TV only show snow and noise on the screen?
If your Sony TV only shows snow and noise on the screen, the CABLE setting may not be set correctly in the SET UP menu. Ensure that you have selected the correct CABLE mode in the SET UP menu.
What to do if my Sony TRINITRON KV-27V40 has poor picture but good sound?
If your Sony TV has a poor picture but good sound, the VIDEO menu settings may not be adjusted correctly. Readjust your VIDEO menu settings. Also, antenna/cable connections may be faulty, so check your VIDEO LABEL settings.
Why is there no color on my Sony TV?
If there is no color on your Sony TV, the color settings may not be adjusted correctly. Adjust the COLOR settings in the VIDEO menu.
How to increase volume on Sony TRINITRON KV-27V40 when using a cable box?
If you cannot gain enough volume on your Sony TV when using a cable box, press TV (FUNCTION) and adjust the TV's volume.
Explains the function and color coding of remote control buttons for various functions like TV, VTR, DBS, etc.
Explains how to connect a DBS (Direct Broadcast Satellite) receiver to the TV for signal reception.
Guides users through the Easy Setup Guide for automatic on-screen language and channel setup.
Provides a step-by-step guide on using the MENU button and selection buttons to modify TV settings.
Details how to adjust picture settings like mode, brightness, color, hue, and sharpness using the VIDEO menu.
Explains how to adjust audio settings such as treble, bass, balance, auto volume, and speaker output.
Guides on setting the current time, daylight saving, and the ON/OFF timer for scheduled viewing.
Details channel setup, fixing, auto program, and skipping/adding channels for optimal reception.
Provides instructions and code numbers for programming the remote to operate VCRs from various manufacturers.
General| Screen Size | 27 inches |
|---|---|
| Display Type | CRT |
| Resolution | 480i |
| Aspect Ratio | 4:3 |
| Inputs | Composite, RF |
To Next Page
