Getting Started
-EN
11
Disabling program positions
By disabling unused or unwanted program positions,
you can skip those positions when you press PROGR
+/–.
1 Press MENU.
2 Press + or – to move the cursor (z) to the
PRESET menu ( ), and press ENTER.
3 Press + or – to move the cursor (z) to SKIP,
and press ENTER.
4 Press + or – until the unused or unwanted
program position appears on the menu,
and press ENTER.
5 Press + or – to select ON, and press ENTER.
6 To disable other program positions, repeat
steps 4 and 5.
7 Press MENU to return to the normal screen.
To cancel the skip setting
1 Display the PRESET menu.
2 Press + or – to move the cursor (z) to SKIP, and
press ENTER.
3 Press + or – until the program position you want to
cancel the skip setting appears, and press ENTER.
4 Press + or – to select OFF, and press ENTER.
5 Select the program position to which you
want to preset a channel.
(1) Make sure the cursor (z) appears beside PR, and
press ENTER.
(2) Press + or – until the program position you want
appears on the menu, and press ENTER.
6 Select the desired channel.
(1) Press + or – to move the cursor (z) to VHF LOW,
and press ENTER.
(2) Press + or – until the desired channel picture
appears on the TV screen, and press ENTER.
7 Press MENU to return to the normal screen.
If the TV system is not properly selected
The picture color may be poor and/or the sound may
be noisy. In this case, select the appropriate TV system.
1 Press PROGR +/– or the number buttons to select
the program position.
2 Display the PRESET menu.
3 Press + or – to move the cursor (z) to TV SYS, and
press ENTER.
4 Press + or – until the appropriate TV system
appears, and press ENTER.
Notes
• The TV system setting is memorized for each program
position.
• If you do not know your local TV system, consult your nearest
Sony dealer or authorized service center.
To Next Page
Loading...
