Operations
12
-EN
Watching the TV
To scan through program positions
Press PROGR +/– on the remote commander or the
TV until the program position you want appears.
3 Press VOL +/– on the remote commander or
VOLUME +/– on the TV to adjust the volume.
Turning off the TV
To turn off the TV temporarily
Press POWER on the remote commander. The standby
indicator lights up.
To turn off the TV completely
Press POWER on the TV.
Watching the video input
Press VIDEO/HOLD on the remote commander
or TV/VIDEO on the TV.
PROGR
VOL
POWER
1 Press POWER to turn on the TV.
When the TV is turned on in the standby mode
after pressing POWER on the TV, press POWER on
the remote commander.
2 Select the TV program you want to watch.
To select a program position directly
Press the number button.
To select a two-digit program position, press “÷”
before the number buttons.
For example: to select program position 25, press
“÷,” then “2” and “5.”
POWER
TV/VIDEO VOLUME PROGR
POWER
1
2
3
4
5
6
7
8
9
0
-/--
25
-/--
To Next Page
Loading...
