39
Additional Information
Sony KV-SA32M36 Group F12 (GB)_2-348-392-11 (1)
Possible causeSymptom
Solutions
The wide screen
mode changes
spontaneously
when “Auto Wide”
is “On”.
The 1
(standby)
indicator on
your TV flashes
red several
times after
every three
seconds.
The TV screen
sometimes goes
blank for
slightly longer
than usual
during channel
change.
TV cabinet
creaks.
A small “boom”
sound is heard
when the TV is
turned on.
13
13
27
–
–
–
–
•
During a transition
between two programs,
the TV detects the
optimum wide screen
mode. During this
period, an irregular wide
screen mode may appear.
• The wide screen mode
is switched
automatically according
to the received signal
with an ID-1 or WSS
signal.
• The Auto Wide feature
stops working
temporarily when you
have pressed , and
functions again when
the signal format
changes.
• Your TV’s self-
diagnosis function
indicates the possible
problems.
• The “Signal Booster” is
functioning to detect a
weak signal. This does
not indicate a
malfunction.
•
Changes in room
temperature sometimes
make the TV cabinet
expand or contract,
causing a noise. This
does not indicate a
malfunction.
• The TV’s demagnetizing
function is working.
This does not indicate a
malfunction.
—
—
• To fix in the manually selected wide
screen mode, set “Auto Wide” to “Off”in
the “Wide Screen” menu.
• Count the number of times the 1
(standby) indicator flashes. Press !
(main power) to turn off your TV.
Contact your nearest Sony service center.
—
—
—
Page
01GB08ADV-STMOce.p65 10/14/04, 6:08 PM39
Black
To Next Page
Loading...
