Soptop FA2204 - Configuring Balance; 5.1 Operating the Configuring Keys

23
Page area line area word area
Page area line area word area
press key shortly to choose. Press to switch after enter system.
4.7 Date Communication
Press , could output the current reading of weight from RS232C port. There is another way to output
reading date, shown at part seven.
5 CONFIGURING BALANCE
5.1 Operating the Configuring Keys
·Connet to the power. Keep pressing both the and on the shutdown of balance.
·Balance full – screen displays and displays self-inspection sign, then display
·Page area, line area and word area all display number from “ zero ” to a certain number automatic circulated
·The zero show in page, line or word area means that if now press shortly, the balance will
return to last menu.
·Nonzero digital in page or ine zrea, if press shortly, enter to the next menu.
· Nonzero digital in word area, if press shortly, select setting and showing “V” at same time.
· When balance displays , the “V” means the new setting is valid.
· All functions are set on when produced. No need to set all the functions. You can set some of the functions to
meet your special requirements.
ON
/
OFF
MODE
/

C ×
TARE
/

TARE
/

TARE
/

C××× V
CAL
/
