BMK-8 U / BMK-12 W
45
Should it become necessary to replace fuses, only use fuses with the prescribed
electrical values. Oversized fuses could either cause defects on the electrical system or
a fire.
DANGER
Disconnect the mains plug from the mains supply when replacing fuses.
9 Troubleshooting
The following list of errors, their causes and remedies is designed to help you eliminate any trouble
immediately on the spot. If it is difficult or impossible to eliminate the trouble, please contact the
SOYER customer service responsible for your area or Heinz Soyer Bolzenschweißtechnik GmbH.
DANGER
Always disconnect the mains cable from the socket and the shielding gas and
compressed-air supplies from the connections of the stud welder before starting any
repair, maintenance or cleaning works.
CAUTION
Electric and electronic components may only be replaced by the SOYER
®
customer
service or by trained and appropriately qualified personnel.
To Next Page
Loading...
