User manual EXPERT 2K-FA
Pag. 24 of 24 Issue 2 – May 2011
Note: ATTENTION: When the amplifier is either in “STANDBY” or “OPERATE” mode,
always disable the automatic tuner in your transceiver.
Note: ATTENTION: As two different tables are used for INPUT1 and INPUT2, it is necessary
to program separate matching, for the same antenna, depending on the used input.
Ignoring this caution could make the amplifier work for a long period with a high SWR
and this practice could seriously damage the amplifier even if the protection level is a
bit lower than the threshold.
To Next Page
Loading...
