Speco D4VT - Page 33

33
4-4-3. Spot Out
Figure 4.4.7. SPOT-OUT Setup Screen
Table 4.4.3. Menu Item in SPOT-OUT Setup Screen
Item
Description
SPOT OUT
Only 1 Spot Out is available to use.
SPOT TYPE
SPOT 1 supports only FULL type. (1 channel only)
SPOT ON EVENT
Enable/disable channel change if an event occurs on a channel.
SPOT EVENT
DWELL TIME
Set the dwell time for the display of the event activated channel.
(3-10 sec)
SEQUENCE
Enable/disable sequential display of spot channel in full screen.
If select ON, the selected channel will be displayed on the monitor
periodically.
SEQUENCE
DWELL TIME
Set the dwell time for the spot channel display.(3-10 sec)
SPOT CHANNEL
Select a channel for spot monitoring using the mouse or the remote
control and press OK button.