Spectra T200 - Page 19

T200, T380, or T680 Transporter Replacement Remove the Transporter
August 2012 Replacing the Transporter—Spectra T200, T380, and T680 Libraries
19
5. If you rotated the cartridge picking mechanism to a vertical position in
Step 2 on page 17, rotate it counterclockwise, back to its horizontal
position.
6. Gently push the cartridge picking mechanism toward the back of the
library.
7. Using a 5/32-inch Allen wrench or T-handle hex wrench, remove the
four screws that secure the transporter to its mounting bracket.
Note: Insert the wrench through the openings in the side of the
transporter to reach the bottom two screws.
Caution
Be careful not to drop the screws into the transporter or onto any of the internal
components.
Figure 17 Remove the screws securing the transporter to the mounting bracket.