8
LCM Replacement Instructions
90970024
a. Select Export.
b. Decide whether to save the key to a USB device, or to mail it to a
previously defined email recipient.
Spectra Logic recommends saving the key to a USB device as it
allows he library to verify that the save completed successfully by
using the Check Key Files option. If you plan to save the key to a USB
device, plug the USB device into the LCM before proceeding (see
Figure 1).
Note: Do not use the default autosupport@spectralogic.com email
recipient. Spectra Logic does not save emailed configuration
files.
c. Enter a password, which is used to encrypt the key itself, select
Next.
d. Make a record of the password, which you will need to import the
key. Without it, you cannot import the key, and the data which was
encrypted using the key will be inaccessible.
e. Confirm that the encrypted key copied correctly by using one of
these methods:
USB device—Select the Check Key Files button.
If the confirmation indicates the key did not copy correctly, delete
all data from the USB device so that no trace of the failed key
attachment remains, then re-export the key to a different USB
device, beginning with Step 2.
Emailed—Confirm the receipt of the attachment by contacting the
user to whom you sent the encrypted key file and verifying receipt
and validity of the key.
To Next Page
Loading...
