Spectra T50e - CHAPTER 1 Library Overview

January 2009 Spectra T50e Library
21
5. Press Select. The screen refreshes to show the details for the selected
utility.
6. Select Run to execute the utility. After a brief delay, the Utility Results
screen appears, showing that the configuration file was uploaded and/
or the configuration restored.
Note: Running any one of these utilities requires the library to reboot.
Restoring the Configuration via Gathered Information
If there is no stored configuration, or if the restoration of the configuration
from the USB key fails, follow the procedures outlined in the Spectra T50e
Library User Guide to build new partitions and to program the necessary
user settings. Use the information that you gathered in You do not have a
Valid Backup Library Configuration on pages page 6 to page 15.
Rebuild the configuration in this order:
1. Option keys
2. Encryption keys
3. Partitions
4. Networking
5. Email and SMTP information
6. Date and Time
7. Settings
8. AutoSupport Log profiles
9. Users and passwords
Restarting Backups
After you restore the library configuration and the library finishes
rebooting, use your backup software to restart any backup processes.
STORE CONFIGURATION CHANGES
Spectra Logic recommends that you always store a copy of the current
library configuration on a USB device. Any time you make a change to a
partition parameter, the library asks you to save the configuration change
to a USB device; Spectra Logic recommends taking advantage of this
feature.