SpectraLink S33 - Speed Dial

Spectralink S33 Handset User Guide
Handset S33 User Guide.docx
July 2023 31
Dial from Call List
1. Press to enter the main menu.
2. Scroll to Calls, and press .
3. Scroll to the desired list (Incoming/Outgoing/Missed Calls), and press .
4. Scroll to the desired name or number, and press .
Redial
1. Press to enter the main menu.
2. Scroll to Calls, and press .
3. Scroll to Outgoing Calls, and press .
4. Scroll to the desired name or number, and press .
Timesaver:
Alternatively, press the left side of the navigation key to enter the call list. Scroll to the
desired name or number, and press .
Speed Dial
If you have assigned a number to one of the speed-dialing keys 0-9, do the following:
• Press and hold a key (0-9) for three seconds, until the call is initiated.
Initiating Ad-hoc Conference Call
Ad-hoc Conference call is a system dependent feature and only supported by Cisco Unified
Communications Manager. Contact your system administrator for more information.
To Initiate an Ad-hoc Conference Call
1. Dial number.
2. Press .
3. Press , scroll to New call, and press .
4. Dial a new number. The first call is automatically put on hold while dialing the second
number.
5. Press .
6. When the second call is connected, press , and then press Join in conference.
7. Press to end the call.