SpectraLink S33 - Security

Spectralink S33 Handset User Guide
Handset S33 User Guide.docx
July 2023 86
Missed Calls
It is possible to get notifications of missed calls shown in the display. If Show missed calls
is turned on, the missed calls icon shows in the display. To see details about the missed
calls, you can press Details.
To Show/Hide Missed Calls
1. Press to enter the main menu.
2. Scroll to Settings, and press .
3. Scroll to Call Options, and press .
4. Scroll to Show missed calls and press to select between On or Off.
Flash LED on Call
You can set your handset LED to flash when receiving an incoming call.
To Set Flash LED to On/Off
1. Press to enter the main menu.
2. Scroll to Settings, and press .
3. Scroll to Call Options, and press .
4. Scroll to Flash LED On Call and press to select between On or Off.
Security
DECT Security
You can monitor the DECT system security state if encryption is enabled on the server. It is
only if encryption is enabled, that you can monitor if system security state has changed
(encryption being disabled). A notification is shown in the display.
Note:
If the system security state changes during a call, the ongoing call will still be encrypted.
The subsequent calls will not be encrypted and will end after 15 sec if the handset is not
power cycled. Further power cycles will ensure the handset can only make unencrypted
calls until encryption is enabled on the server again. Contact your system administrator
for more information.