SpectraLink S33 - Audio

Spectralink S33 Handset User Guide
Handset S33 User Guide.docx
July 2023 71
Audio
The Audio menu contains all the options related to adjusting the sound output of your
handset, in addition to other call quality related settings.
Note:
If a menu/submenu/setting/function is not visible, it is controlled by a local administrator.
Contact them if a change is needed.
Ringing tone
The ring tone is followed by a number indicating the chosen tone of the ringer. It is possible
to choose between 12 different ring tones. The last two ring tones are suitable for noisy
environments. You can distinguish between an internal and external call by the ring tone.
The ring tone of an internal call is followed by three short beeps (system dependent feature).
To Choose a New Ring Tone
1. Press to enter the main menu.
2. Scroll to Audio, and press .
3. Scroll to Ring tone, and press .
4. Scroll to the desired ring tone, and press the right side of the navigation key to
listen to the ring tone. Repeat the process if you want listen to other ring tones.
5. Press the left side of the navigation key to listen to the internal calls ring tone
(system dependent feature).
6. Scroll to the desired ring tone, and press to select the new ring tone.
Note:
If you cannot hear the ring tones, check that Silent mode is turned off.
Ringing volume
To Adjust the Volume of the Ring Tone
1. Press to enter the main menu.
2. Scroll to Audio, and press .
3. Scroll to Ring tone, and press .