SpectraLink S33 - Using the Menu; Description of Menus

Spectralink S33 Handset User Guide
Handset S33 User Guide.docx
July 2023 42
Using the Menu
Description of Menus
Note:
If a menu/submenu/setting/function is not visible, it is controlled by a local administrator.
Contact them, fi a change is needed.
The handset offers a range of functions that are grouped into menus. The main menu
consists of the following menus: Contacts, Calls, Audio, Settings, Profile, Messages and
Shortcuts.
Note:
If the handset is in menu mode, and an incoming call arrives, then the menu will be
dropped and the call will be handled as usual. When the call is terminated, the handset
returns to menu mode.
In the following, you will find a short description of the menus.
Contacts
You can store directory numbers/SIP extensions and names in your local contact list.
Note:
Besides your local contact list that can be reached and managed from the main menu,
there is also a central contacts list pointing to a corporate directory list (common contact
list) containing numbers to call. For more information, see Central Contacts (System
Dependent)" on page 32.
To support the company contact list feature, the Spectralink IP-DECT Server must have
firmware version PCS 17C or newer. Contact your system administrator for more
information.
The contact list can store up to 350 names with up to four numbers each (up to 4 directory
numbers or a combination of directory numbers and SIP URIs. The maximum number of SIP
URIs are 2. Maximum directory numbers are 4. The total number of numbers stored must
not exceed 4 though. E.g. 4 directory numbers and 0 SIP URIs or 3 directory numbers and 1
SIP URI or 1 directory number and 2 SIP URIs). The maximum length of a directory number
allowed is 24 digits. The maximum length of a SIP URI allowed is 64 characters. Names are
sorted alphabetically starting with their first character.