SpectraLink S33 - Handset

Spectralink S33 Handset User Guide
Handset S33 User Guide.docx
July 2023 89
6. Enter the relevant ARI. Contact your system administrator for more information.
7. If required, enter an AC Code and User ID.
8. Press . The handset will start searching for a system with the entered ARI.
9. Press again to confirm.
Signal Strength
This feature can be used to check the signal strength of the base stations and the signal
quality of the handset while in a call.
To Check RSSI Values
1. Press to enter the main menu.
2. Scroll to Settings, and press .
3. Scroll to System, and press .
4. Scroll to Signal Strength, and press . The bearer quality is shown in the display.
Handset
Time & Date
When you turn off the handset, time and date settings are deleted if the subscribed system
does not resend the information to the handset.
Choose Time Format
You can choose between the two formats: 24 hours or 12 hours.
1. Press to enter the main menu.
2. Scroll to Settings, and press .
3. Scroll to Handset, and press .
4. Scroll to Time & date, and press .
5. Scroll to Time format, and press .
6. Press to select between the options.
Change Time
1. Press to enter the main menu.
2. Scroll to Settings, and press .