SpectraLink S33 - Audio Settings

Spectralink S33 Handset User Guide
Handset S33 User Guide.docx
July 2023 73
• Display flashing: When turned on, the display flashes when an incoming call
arrives.
• Vibrate: When turned on, the handset vibrates when an incoming call arrives.
• Short ring: When turned on, a short ring sounds when an incoming call arrives.
To Change Silent Mode Settings
1. Press to enter the main menu.
2. Scroll to Audio, and press .
3. Scroll to Silent, and press .
4. Scroll to Settings, and press .
5. Scroll to the desired setting, and press to enable it.
Audio Settings
Out of Range
The out of range indicator appears when handset is moving out of range or already is out of
range of base station.
With the out of range indicator turned on, the following appears in the display:
• If handset is moving out of range, the low signal icon appears in the display.
• If the handset gets out of range, the no signal icon appears in the display. If tone +
icon is selected, beeps sounds when the handset comes out of range.
Note:
When the handset has been outside the range area, it can take up to 30 seconds before
the handset is back on the system after re-entering range area.
To Turn Out of Range Indicator On/Off
1. Press to enter the main menu.
2. Scroll to Settings, and press .
3. Scroll to Audio, and press .
4. Scroll to Out of range, and press .
5. Scroll between On or Off using .