SpectraLink S33 - About

Spectralink S33 Handset User Guide
Handset S33 User Guide.docx
July 2023 83
To Change Long Key Definition
1. Press to enter the main menu.
2. Scroll to Settings, and press .
3. Scroll to Handset, and press .
4. Scroll to Long key, and press .
5. If you want to have all digits between 0-9 set as either Speed dial or MSF, press
to select either Speed dial or MSF.
If Speed dial is selected, you can also define Push to unmute for the relevant digit
under the Settings menu. Scroll to the Settings menu below, select relevant Speed
dial, and press , scroll to Push to unmute, and press again.
6. If you want to define individual settings for each digit (a mix of Speed dial and MSF),
scroll to the Settings menu below, and define the relevant action for each digit.
About
Information
You will find general handset information about:
• Model type/name (if available)
• IPEI number of the handset (International Portable Equipment Identity)
• Firmware version
• Hardware version
• Bluetooth (MAC address for Bluetooth and Bluetooth software version)
• Unique Product ID (P-ID)
• Frequency band (frequency band of handset)
o Standard handsets:
 Europe
 NZ Power
 North America
 DECT 6.0
o Frequency swap handsets:
 1G8
 1G9