06/02/2020 Vers. 0.0 59
10.7 Utilities
In the "Utilities" menu the following functions can be found:
• INTERNAL CLEANING
• REFILLING WASH*
• RECYCLING WASH*
• NITROGEN TEST*
*Take notice: the starred functions can be used only with some additional accessories available upon request.
Please contact your seller to know the kit's prices and availability.
10.7.1 Internal Cleaning
Connect the quick fittings to the male fitting on the station (img 6-g), open the taps and the quick fittings and
confirm with “Enter”.
Set the desired duration of time for the cleaning.
Pressing the "Enter" key a cleaning and rinsing of the gas inside the station will take place.
Once the duration of time set has passed, the station will switch to the automatic oil discharge.
The station is able to carry out an auto-cleaning of the internal circuits. The function "Internal Cleaning" is also ideal
for the treatment of the gas contained in the internal bottle.
The cleaning will stop automatically once the duration of time set has passed.
WARNING to be able to complete a cleaning it is necessary for the bottle to contain at least 4 kg of gas.
WARNINGdo not make a cleaning with quick fittings connected to a vehicle
10.7.2 Refilling wash*
Warning: To be able to carry out the refilling wash of the AC system it is necessary to ask for the 01.000.96 kit at
our distributor.
With Spin's washing kit it is possible to carry out the washing of AC systems without the need to strip down any part
of the system or with the compressor dismantled.
To confirm press the "Enter" key
To Next Page
Loading...