Spinlab Bird Dog Plus 5000 - Table of Contents

ii
TABLE OF CONTENTS
Page #
INTRODUCTION i
TABLE OF CONTENTS iii
SECTIONS
F.1 SETUP PROCEDURE FOR THE 6000 BIRD DOG PLUS 1
ONLY
F.1.1 6000 Bird Dog Plus Case 1
Note: Connecting the Large I Probes to the 6000 Bird Dog Plus 2
F.1.2 3 Phase Connector Box 3
Note: Previous Owners of the 1500 High Voltage Kit 5
F.2 STANDARD TEST PROCEDURES 7
F.2.1 STP for Single Element Meter Circuit Testing 7
F.2.2 Screen Flow for Single Element Meter Circuit Testing 9
F.2.3 STP for 6000 Bird Dog Plus Simultaneous 3 Phase Meter 13
Verification Testing After a Meter Circuit Test
F.2.4 Screen Flow for 6000 Bird Dog Plus Simultaneous 3 Phase 15
Meter Verification Testing After a Meter Circuit Test
F.2.5 STP for 6000 Bird Dog Plus Simultaneous 3 Phase Meter 19
Verification Testing on a Self-Contained Meter
F.2.6 Screen Flow for 6000 Bird Dog Plus Simultaneous 3 Phase 21
Meter Verification Testing on a Self-Contained Meter
F.2.7 STP for 5000 MV Single Element Meter & Meter Circuit 27
Testing
F.2.8 Screen Flow for 5000 MV Single Element Meter & Meter 29
Circuit Testing
F.2.9 STP for 5000 MV Single Element Meter Verification 35
Testing
F.2.10 Screen Flow for 5000 MV Single Element Meter Verification 37
Testing & a Form 2 Meter
F.2.11 STP for the 1500 High Voltage Probe Operation 43
F.2.12 STP for Uploading Records to the PC 51
F.2.13 Screen Flow for Uploading Records to the PC 53
(Communication Troubleshooting Guide) 57