iv
F.3.2.8 Form 2 Meters: 2 & 3 Wire 101
Note: Ensure a .5 Amp Minimum on Each Conductor 101
of a Form 2 Circuit
F.3.2.9 Form 12 Meters 102
F.3.2.9.1 Form 12 Meter: Network 102
F.3.2.9.2 Form 12 Meter: 3 Wire Delta 103
F.3.2.10 Form 14 Meters: 4 Wire Wye 104
F.3.2.11 Form 15 & 17 Meter: 4 Wire Delta 104
F.3.2.12 Form 16 Meter: 4 Wire Wye 105
F.3.3 Meter Sensor Hookup Procedure 107
F.3.3.1 Laser Sensor for Mechanical Meters 107
Note #1—Don’t Look into Laser 108
Note #2--Laser Sensitivity Adjustment 108
F.3.3.2 Laser Sensor for Electronic Meters 108
F.3.3.3 Infrared Sensor 109
Note #1—Unnecessary to Disconnect Laser Sensor When Using 110
Infrared Sensor
Note #2—OPTOCOM Port with a Separate LED for 110
Infrared Pulse
F.3.3.4 Optional Sensors and Pickups 111
F.3.3.5 Detecting Rotations or Pulses on the Bird Dog Plus 112
Note—How to Get Pulses Out of Electronic Meters 113
To Next Page
Loading...