39
6.4.2 MODE sub-menu
Entering this menu (press ) allows the user manual drive the valve or pump to assist in
commissioning:
Modulating control:
CLOSED: Drive valve closed
OPEN: Drive valve open
STOP: Stop the valve and leave in current position.
ON/OFF control:
Pump on: Switches the pump on
Pump off: Switches the pump off
Toggle between the settings using the
and buttons.
Select the required setting by pressing the
OK
button.
Press the button to exit the sub-menu and return to the run mode.
MODE
OPEN
Note: When exiting this menu, the product will switch off the pump or stop the
value in its current position.
To Next Page
Loading...
