Spirax Sarco VLM30 - Page 56

IM-P736-02 EMM Issue 3
56
VLM30 In-Line Vortex Flowmeter
4.8.3 Select the operating mode
For more information on the operating mode, refer to Section 4.9.8 Operating modes.
4.8.2 Selection of the menu language
1. Use to call up the edit mode.
2. Use / to select the desired language.
3. Confirm the selection with .
1. Use to call up the edit mode.
2. Use / to select the desired operating mode.
3. Confirm the selection with .
4.8.4 Configuration of the current output
Only for devices with HART communication!
1. Use to call up the edit mode.
2. Use / to select the desired language.
3. Confirm the selection with .