EasyManua.ls Logo

SPOT Mayhem 130 - Component Compatibility; Frame Component Specifications

SPOT Mayhem 130
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Mayhem 130 Frame Component Compability
Your Mayhem frame was designed to work with the following components. Other components may be
compable, but tment is not guaranteed. For quesons regarding component compability of parts
not listed below please contact Spot.
COMPONENT FIT, STANDARD
HEADSET UPPER: ZS44, LOWER: ZS56
BOTTOM BRACKET BSA THREADED, 73mm SHELL WIDTH
SEATPOST 31.6, INTERNAL DROPPER ROUTING
CHAINRING >51mm CHAINLINE, 30-34t RING
REAR HUB 12 X 148, SRAM UDH MAXLE INCLUDED
REAR BRAKE 160mm STANDARD POST MOUNT, 180mm MAX ROTOR DIAMETER
REAR TIRE 29 X 2.5" / 64mm MAX WIDTH. ACTUAL TIRE WIDTHS CAN VARY FROM PRINTED SIZES
REAR SHOCK 230 X 57.5, FRONT EYELET Ø8 X 25mm, REAR EYELET OPEN, NO BUSHINGS
FORK TRAVEL 140-150mm
WATER BOTTLE 2X BOTTLE MOUNTS, ONE ABOVE AND ONE BELOW DOWNTUBE
SEATPOST COLLAR 35.0mm INNER DIAMETER
CHAINGUIDE ISCG-05 MOUNTS, UPPER GUIDE MUST BE MINIMAL SIZE