SPOT Mayhem 130 - Tools for Frame Assembly; General Assembly Tools; Rear Triangle Removal;Replacement Tools

13
Tools Required for Assembling a Frame into a Bicycle:
(Complete bikes delivered from Spot will not require these steps.)
• Hex wrenches / bits: 4mm, 5mm, 6mm
• Torx wrenches / bits: T25, T30
• 10mm 12 point box wrench or 10mm 12point socket (with ratchet)
• Torque wrench, 4Nm (35in-lb) to 14Nm (124in-lb) range
• Headset Press
• Boom Bracket Installaon Tools—may vary by BB brand and model
• High-Pressure Waterproof Grease—we recommend Motorex 3000®
• Isopropyl or denatured alcohol—90% or higher concentraon
Tools Required For Rear Triangle Removal/Replacement:
• Torx wrenches / bits, sizes: At least two T30 tools including one L-wrench
• Torque wrench with T30 Torx bit, 4Nm (35in-lb) to 14Nm (124in-lb) range
• Round pin punch, at p, 8-10mm diameter
• Hammer
• Isopropyl or denatured alcohol—90% or higher concentraon
• Medium strength (blue) thread locking compound, such as Locte 243 (blue)