32F429IDISCOVERY information UM1670
30/32 UM1670 Rev 4
1. U3: L3GD20 replaced by I3G4250D and R75, C54 added
2. Old STMPE811QTR kept and SX8651 added for two footprints, and U9, C55, and R74
added for SX8651, and original STMPE811QTR circuit kept
3. CN5 SF-TC240T-9370-T replaced by FRD240C48003-B: pin1 and pin3 for YU and YD
swapped, pin8 connected with 3V
4. Updated solder bridges:
– ON: SB3, SB5, SB7, SB13, SB19
– OFF: SB4, SB6, SB8, SB14, SB18
5. For BOM for SX8651: as U9 SX8651IWLTRT is soldered, added R29, R30, and R45
4.7 KΩ resistors
6. Updated CN6 footprint
7. Line added on top silkscreen for CN5 when FPC is mounted
7.3 Known limitations
7.3.1 MB1075-F429
Revision B01
ST-LINK update from ST-LINK/V2 to ST-LINK/V2-B
Revision C01
EOL request for L3GD20 and STMPE811QTR
To Next Page
Loading...
Need help?
General
