ST 32F429IDISCOVERY - Features

Features UM1670
6/32 UM1670 Rev 4
1 Features
• STM32F429ZIT6 microcontroller featuring 2 Mbytes of Flash memory, 256 Kbytes of
RAM in an LQFP144 package
• 2.4" QVGA TFT LCD
• USB OTG with Micro-AB connector
• I3G4250D, ST MEMS motion sensor 3-axis digital output gyroscope
• Six LEDs:
– LD1 (red/green) for USB communication
– LD2 (red) for 3.3 V power-on
– Two user LEDs: LD3 (green), LD4 (red)
– Two USB OTG LEDs: LD5 (green) V
BUS
and LD6 (red) OC (over-current)
• Two push-buttons (user and reset)
• 64-Mbit SDRAM
• Extension header for LQFP144 I/Os for a quick connection to the prototyping board
and an easy probing
• On-board ST-LINK/V2-B
• USB functions:
– Debug port
– Virtual COM port
– Mass storage
• Mbed Enabled™ (see http://mbed.org)
• Board power supply: through the USB bus or from an external 5 V supply voltage
• Comprehensive free software including a variety of examples, part of STM32CubeF4
MCU Package or STSW-STM32138, for using legacy standard libraries